FDA and NSF rated epoxy coatings

	What is Aquaply SLP?	Properties
	How to apply	Available Colors

WHAT IS AQUAPLY SL-P?

Aquaply SL-P is self-leveling and penetrating epoxy, for concrete or wood. FDA and NSF rated.

two component	1:1 RATIO
self leveling	spray, squeegee, roll
penetrating	displaces water
high solids	durable & resistant
solvent free	low VOC"s

HANDLING AND PHYSICAL PROPERTIES

Appearance amber or pigmented

Density (lb/gal) 8-9

Flash Point (closed cup) >215F

Gel time @ 50F/min 60

Full cure @ 50F/day 4-5 wet or dry

Viscosity cps @ 77F 1,000

Coverage ft/gal 150-200 @ 20-40mils

Hardness (Shore D) 80

Compressive Strength psi 9,000

Compressive Modulus ksi 287

Tensile Strength psi 6,600

Tensile Modulus ksi 195

% Elongation @ break 16

Flexural Strength, psi 9.900

Flexural Modulus, ksi 308

Abrasion resistance 0.03 gm@ 1000 cycles wt. loss

Preparation
Maintenance

COLORS

We will custom color.

Marble chips are available in a variety of colors and sizes.

In addition to the marble aggregate, we offer silica and pebbles in trowelable or broadcast formulations.

We will design specialty coatings for your needs.

SHIPPING & FREIGHT

Part A, 1 Gallon, Includes Marble Aggregate or Colorquartz of choice for 200-300 sq ft.	Not Regulated
Part B, 1/2 Gallon	Amines:, liquid, corrosive, n.o.s. (fatty acid diamines);8;UN 2735;PG111

STORAGE
May be kept in sealed containers @ Ambient temperature for 12-24 months.

PACKAGING
Available in gallons, pails, drums

PREPARATION
Concrete has cured for 10-14 days, vacuum or abrasive Blasting removing all dirt and laitance. Repair defects by Sacking method. Vacuum residual dust or pressure wash.