Epoxy paint and coating for Stainless Steel.

	What is Aquaply 80SS?	Properties	Available Colors
	Shipping & Freight DOT

Aquaply 80SS

product information

What is Aquaply 80SS?

Aquaply 80SS is a stainless steel filled, solvent free, low VOC, two part epoxy coating for rebar and other substrates. It is the ultimate corrosion protection coating with the combination of epoxy and stainless steel. It is much more cost effective than stainless sheathing. Aquaply 80SS is idea for machinery and for storage tanks containing petroleum products on land and on sea and as a coating for industrial flooring.

ADVANTAGES

Two component 1:1 Ration Mix

Self leveling

Penetrating

Flexible, impact resistant

High solids

Solvent free

Low VOC's

APPLICATIONS

     Spray
     Roller, brush
     Dip

PREPARATION

     Hydroblast to remove previous coatings,
       grease, and rust
     For concrete, remove all dirt and
        laitance, vacuum or pressure wash
     Use our RUSTPRIME primer

STORAGE

Aquaply 80SS may be kept in sealed containers @ ambient temperature for 12-24 months.

PHYSICAL PROPERTIES

Appearance	Amber or pigmented
Density lb/gal.	8-9
Flash point (closed cup)	>215F
Gel time min./77F	60
Full cure day/77F	4-5
Viscosity cPs@77F	1,000
Coverage ft./gal.	150-200@ 10-20 mils.
Hardness (shore D)	80
Compressive Strength, psi	9,000
Tensile Strength, psi	6,600
Elongation	>20

AVAILABLE COLORS

Stainless steel

SHIPPING & DOT

Part A,	Not Regulated
Part B	Not Regulated

Available in gallons, pails, and drums.

This product meets military specifications for the US Navy, Army, and Air Force

Member SSPC